Compare SANIJET Pipeless™ spa baths to other piped whirlpools and you’ll immediately realize the difference our patented technology makes. Our side-by-side comparison chart helps make the choice crystal clear.

Compare
Sanijet Pipeless Spa Baths
Piped and Air Bubble Spa Baths

Water
Purity

SANIJET Pipeless systems are certified by NSF International for complete Level II EPA disinfection under Protocol P182, ensuring elimination of 99.9% of bacteria – for clean and pure bathing water.

Testing found high concentrations of infectious bacteria in 100% of piped whirlpools tested, including E. Coli, Staphylococcus, Legionella and Pseudomonas from locations throughout the United States.

Cleaning
Protocols

In approximately 5 minutes, every wetted component of a SANIJET pipeless spa bath can be thoroughly cleaned to hospital-grade disinfection standards (NSF International) after each use.

Recommended cleaning protocols like diluted bleach rinses and other techniques are ineffective, as they do not physically scrub clean the inner pipe and channel surfaces. To our knowledge, there is no scientific data proving the efficacy of these cleaning regimens.

Inaccessible
Wetted Surfaces

Every component that comes in contact with water is easily accessible from inside the bath tub for quick and easy cleaning.

These systems contain jet bodies, air bubblers, air channels, up to 30 feet of water or air piping, fittings, pumps and blowers. These hidden components trap bathing residue that can promote the growth of infectious bacteria and are inaccessible for proper inspection and cleaning by hand.

Noise
Level

At just 58 dB, our jets function quietly and smoothly for a more relaxing bath.

The higher decibel (dB) levels in piped whirlpools (68dB) and air bubble baths (77dB) creates an unpleasant and noisy environment.

Superior
Hydrotherapy

Our pipeless hydrotherapy system was developed to deliver an authentic spa experience – pure, clean and ultra-quiet. Convergent and Direct Flow Technology provide soothing, spa-quality performance and a customizable spa bathing experience.

Most piped whirlpool tubs and air baths offer an assortment of jets and air holes to create “hydrotherapy”.

Spa and Bath
Additives

Enjoy essential oils, bath salts, and aromatherapy products. Residue can be completely removed with a simple, thorough cleaning.

Most piped whirlpool and air bath manufacturers caution against using bath salts, oils or other additives as they build-up in the piping and air channels making an unsanitary system even worse.

Water
Retention

Our pipeless spa baths retain less than 0.2 fluid ounces – about a teaspoon – which is easily accessible for quick cleaning.

A typical piped whirlpool tub or air tub can retain more than 13 fluid ounces of dirty bath water, which is inaccessible for cleaning. Bathers often feel this dirty water as a “cold water blast” when the system is activated.

Water
Heat Loss

A typical SANIJET Pipeless bath loses only 1.5 degrees of temperature in a 20 minute bathing cycle, almost imperceptible to the human body.

These systems can lose up to 8 degrees of heat in 20 minutes due to the injection of cool air, lengthy external piping and air channels. Expensive in-line water heaters are required to attempt to maintain water temperature for these systems.

Learn how SANIJET’s patented pipeless technology is Engineered For Simplicity

The Benefits of Pipeless Technology